Original file

BMW F10 Bosch MEVD17.2.8 0030027012 / 1037524472

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW F10, hardware number 0030027012 and software number 1037524472, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10S63B44 · 560.0PS / 411.9kW
Control unit
Bosch MEVD17.2.8
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0030027012
Software number
1037524472
Bosch part / software
1037533729
Software / calibration
8BC959BB / 500_S63_BG2_US_DKG018

Technical data

Vehicle
BrandBMW
Car modelF10
EngineS63B44
FuelPetrol
Displacement4.4
Power560.0PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number0030027012
Software number1037524472
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0bafd3968da0ab41
Identification read from the file
ECU nameMEVD17.2.8
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037533729Offset in the file: 0x18001A
Software / calibration8BC959BB / 500_S63_BG2_US_DKG018Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG
Internal build stringMEVD17.2.8-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//8BC959BB/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0030027012 and software number 1037524472. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

HardwareSoftwareVehicles
000012420331011037524472BMW 6er M6 4.4 BiTurbo
000501704510SW003484BMW 6 Serie - Gran Coupe
00300175281037525741BMW F12/F13/F06
00300259041037524472BMW 5er
00300286041037525741BMW 7 Serie - Sedan
00300732891037531368BMW 5er
00300925591037539969BMW 6er
02453996911037539969BMW 5er

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page