Original file

BMW 6 Serie - Gran Coupe 650i Bosch MEVD17.2.8 8AC95D0B#95DNB9X2 / 1037528013

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW 6 Serie - Gran Coupe 650i, hardware number 8AC95D0B#95DNB9X2 and software number 1037528013, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 6 Serie - Gran Coupe 650ipetrol 450.0PS / 331.0kW
Control unit
Bosch MEVD17.2.8
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8AC95D0B#95DNB9X2
Software number
1037528013
Software / calibration
8AC95D0B / 95DNB9X2

Technical data

Vehicle
BrandBMW
Car model6 Serie - Gran Coupe 650i
Enginepetrol 450.0PS / 331.0kW
Displacement4.4
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number8AC95D0B#95DNB9X2
Software number1037528013
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9d1455e770b04477
Identification read from the file
ECU nameMEVD17.2.8
Read typeFull read (boot area included)
Bosch part / software1037528013Offset in the file: 0x18001A
Software / calibration8AC95D0B / 95DNB9X2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-N63TUE-B44-O1-F06-F12-F13--_ULEV2-AG-LL-RL-RWD
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//8AC95D0B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8AC95D0B#95DNB9X2 and software number 1037528013. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

HardwareSoftwareVehicles
0261S093721037539969BMW F12/F13/F06
0261S096671037533729BMW F10/F11/F18, BMW F12/F13/F06, BMW F10/F11/F18 4.4i
03053996911037539969BMW 5er
8AC2775BBMW 5er/6er/7er
8AC9775B#977N18Y71037542995BMW F01/F02/F03
8AC9795B#979NB8X38AC9795BBMW 6er 650i
8BC959AB#5001037531368BMW F10/F11/F18
8BC959AB#500_S63TUE_BG2_EU_DKG2501037531368BMW 5 Serie - Sedan

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page