Original file

BMW F10/F11/F18 Bosch MEVD17.2.8 8BC959AB#500 / 1037531368

An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW F10/F11/F18, hardware number 8BC959AB#500 and software number 1037531368, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F18S63B44 · 560.0PS / 411.9kW
Control unit
Bosch MEVD17.2.8
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
8BC959AB#500
Software number
1037531368
Software / calibration
8BC959AB / 500_S63TUE_BG2_EU_DKG250

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18
EngineS63B44
FuelPetrol
Displacement4.4
Power560.0PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.8
ECU makerBosch
Hardware number8BC959AB#500
Software number1037531368
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6166312e629a3a95
Identification read from the file
ECU nameMEVD17.2.8
Read typeCalibration only (data set)
Bosch part / software1037531368Offset in the file: 0x18001A
Software / calibration8BC959AB / 500_S63TUE_BG2_EU_DKG250Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//8BC959AB/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8BC959AB#500 and software number 1037531368. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.8

HardwareSoftwareVehicles
8AC2775BBMW 5er/6er/7er
8AC95D0B#95DNB9X21037528013BMW 6 Serie - Gran Coupe 650i
8AC9775B#977N18Y71037542995BMW F01/F02/F03
8AC9795B#979NB8X38AC9795BBMW 6er 650i
8BC959AB#500_S63TUE_BG2_EU_DKG2501037531368BMW 5 Serie - Sedan
8BC959BB#501_S63_BG2_EU_DKG0151037533729BMW 5 Serie - Sedan M5 4.4 Biturbo
8BC959CB#5001037521952BMW F10/F11/F18
8BC959CB#500_S63_BG2_EU_DKG0301037539969BMW 5 Serie - Sedan M5 4.4 Biturbo

Bosch MEVD17.2.8 original files

The Bosch MEVD17.2.8 unit page