Original file
BMW F10/F11/F18 Bosch MEVD17.2.8 DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT / 1037533729
An original (stock) flash read of the Bosch MEVD17.2.8 control unit, fitted in BMW F10/F11/F18, hardware number DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT and software number 1037533729, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW F10/F11/F184.4 560PS
- Control unit
- Bosch MEVD17.2.8
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT
- Software number
- 1037533729
- Software / calibration
- 8BC959BB / 501_S63_BG2_US_SWT_DKG015
Technical data
| Brand | BMW |
|---|---|
| Car model | F10/F11/F18 |
| Engine | 4.4 560PS |
| Fuel | Petrol |
| Control unit | Bosch MEVD17.2.8 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT |
| Software number | 1037533729 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 2a3e5968bc0a4fdd |
| ECU name | MEVD17.2.8 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037533729 | Offset in the file: 0x18001A |
| Software / calibration | 8BC959BB / 501_S63_BG2_US_SWT_DKG015 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT | |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//8BC959BB/Dst00// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.8 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG-SWT and software number 1037533729. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.8
| Hardware | Software | Vehicles |
|---|---|---|
| DST#MEVD17.2.8-N63TUE-B44-O1-F06-F12-F13--_EU5-AG-LL-RL-RWD | 8AC9795B#979NA9X6 | BMW 6er |
| DST#MEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG | 1037524472 | BMW 5er |
| DST#MEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG | 1037533729 | BMW 5er |
| DST#MEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG | 1037539969 | BMW 5 Serie - Sedan, BMW 6er, BMW 5er |
| DST#MEVD17.2.8-S63Tue-B44-T0-F010-ULEV2---_DKG | 1037539969 | BMW 5er |
| MEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG | 1037533729 | BMW 5 Serie - Sedan |
| N63TUE-B44-O1-F01-EU5-AG-LL_ | 10SW003484 | BMW 7er |
| SW: 000010C8633C01 | 1037515403 | BMW 7 Serie - Sedan 4.4i |