Original file

BMW Z4 Bosch MEVD17.2.9 000095

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW Z4, software number 000095, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW Z42.0 · 184.0PS / 135.3kW
Control unit
Bosch MEVD17.2.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
000095
Bosch part / software
10SW000095
Software / calibration
00899U09EI0BKCAX0

Technical data

Vehicle
BrandBMW
Car modelZ4
Engine2.0
FuelPetrol
Power184.0PS / 135.3kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Software number000095
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key32a50277d5f55c94
Identification read from the file
ECU nameMEVD17.2.9
Read typeCalibration only (data set)
Bosch part / software10SW000095Offset in the file: 0x18001A
Software / calibration00899U09EI0BKCAX0Offset in the file: 0x180079
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_99U9EI0B//99U9EI0B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 000095. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

HardwareSoftwareVehicles
BMW 1er/3er/5erBMW 1er/3er/5er
1037515809BMW X1
1037525978BMW 3er, BMW 2 Serie - Coupe, BMW 3 Serie
1037525979BMW 3 Serie - Sedan, BMW 1 Serie - 5drs, BMW 3er
1037526530BMW 3er, BMW 3 Serie - Sedan, BMW 3 Serie
1037527770BMW X1
1037527884BMW 3 Serie - Sedan, BMW 3er, BMW 3 Serie
1037531035BMW 5-Series

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page