Original file

BMW Z4 Bosch MEVD17.2.9 00899U09EF0BKBIX4 / 1037540061

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW Z4, hardware number 00899U09EF0BKBIX4 and software number 1037540061, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW Z42.0 petrol 184PS
Control unit
Bosch MEVD17.2.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00899U09EF0BKBIX4
Software number
1037540061
DME hardware number
8631727

Technical data

Vehicle
BrandBMW
Car modelZ4
Engine2.0 petrol 184PS
Power184.0PS / 135.3kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number00899U09EF0BKBIX4
Software number1037540061
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key95e3b8fe956024e5
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
Bosch part / software1037540061Offset in the file: 0x02001A
DME hardware number8631727Offset in the file: 0x00D8AA
Software / calibration00899U09EF0BKBIX4Offset in the file: 0x180079
Internal build string011_G.8.8.0_MEVD1729P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_99U9EF0B//99U9EF0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00899U09EF0BKBIX4 and software number 1037540061. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page