Original file

BMW 2er Bosch MEVD17.2.9 0170264725 / 1037540114

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW 2er, hardware number 0170264725 and software number 1037540114, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2erN20B20 · 184.0PS / 135.3kW
Control unit
Bosch MEVD17.2.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170264725
Software number
1037540114
Software / calibration
9VT9EF0B / 9EFLELX1

Technical data

Vehicle
BrandBMW
Car model2er
EngineN20B20
FuelPetrol
Displacement2.0
Power184.0PS / 135.3kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number0170264725
Software number1037540114
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc692708e22122847
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037540114Offset in the file: 0x18001A
Software / calibration9VT9EF0B / 9EFLELX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-U0-F020-EU6-HGAG_-LL-RL
Internal build stringMEVD17.2.9-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9EF0B//9VT9EF0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170264725 and software number 1037540114. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

HardwareSoftwareVehicles
01701908201037537945BMW 3 Serie - Gran Turismo
01702110561037537945BMW 2er
01702226421037540090BMW 3er
01702351571037540114BMW 4er
01703215491037540114BMW 3 Serie - Sedan
01703240871037540114BMW 5er
01703461781037540090BMW 3 Serie - Sedan
01703559871037540114BMW 4 Serie - Cabrio

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page