Original file

BMW X4 Bosch MEVD17.2.9 0171199030 / 9VT9G40B#9G4LDEX4

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW X4, hardware number 0171199030 and software number 9VT9G40B#9G4LDEX4, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X4N20B20 · 245.0PS / 180.2kW
Control unit
Bosch MEVD17.2.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0171199030
Software number
9VT9G40B#9G4LDEX4
Bosch part / software
10SW017243
Software / calibration
9VT9G40B / 9G4LDEX4

Technical data

Vehicle
BrandBMW
Car modelX4
EngineN20B20
FuelPetrol
Displacement2.0
Power245.0PS / 180.2kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number0171199030
Software number9VT9G40B#9G4LDEX4
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key946777ae89c696f7
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW017243Offset in the file: 0x18001A
Software / calibration9VT9G40B / 9G4LDEX4Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-O0-F025-EU6-HGAG_-LL-RL-MSA2.2
Internal build stringMEVD17.2.9-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9G40B//9VT9G40B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0171199030 and software number 9VT9G40B#9G4LDEX4. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page