Original file

BMW X3 Bosch MEVD17.2.9 0200002588 / 1037545128

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW X3, hardware number 0200002588 and software number 1037545128, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X32.0 diesel 184PS
Control unit
Bosch MEVD17.2.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0200002588
Software number
1037545128
Software / calibration
9VT9G01B / 9G0LDKX1

Technical data

Vehicle
BrandBMW
Car modelX3
Engine2.0 diesel 184PS
FuelPetrol
Power184.0PS / 135.3kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number0200002588
Software number1037545128
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7938589d20868dca
Identification read from the file
ECU nameMEVD17.2.9
Read typeCalibration only (data set)
Bosch part / software1037545128Offset in the file: 0x18001A
Software / calibration9VT9G01B / 9G0LDKX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-U0-F025-EU6-HGAG_-LL-RL-MSA2.2-CHN-400ZELLER
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9G01B//9VT9G01B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0200002588 and software number 1037545128. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page