Original file

BMW F15 Bosch MEVD17.2.9 92I9EY1B#9EYKHMX2 / 10SW003920

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW F15, hardware number 92I9EY1B#9EYKHMX2 and software number 10SW003920, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F15N20B20 · 245.0PS / 180.2kW
Control unit
Bosch MEVD17.2.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
92I9EY1B#9EYKHMX2
Software number
10SW003920
Software / calibration
92I9EY1B / 9EYKHMX2

Technical data

Vehicle
BrandBMW
Car modelF15
EngineN20B20
FuelPetrol
Displacement2.0
Power245.0PS / 180.2kW
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number92I9EY1B#9EYKHMX2
Software number10SW003920
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9bd1e3d6f46ef3db
Identification read from the file
ECU nameMEVD17.2.9
Read typeCalibration only (data set)
Bosch part / software10SW003920Offset in the file: 0x18001A
Software / calibration92I9EY1B / 9EYKHMX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.U-N20-Gen3-0-Mo-B20-O0-F015--_EU6-HGAG-LL-RL-AWD_JAPAN
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_92I9EY1B//92I9EY1B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 92I9EY1B#9EYKHMX2 and software number 10SW003920. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page