Original file
BMW 3 Serie - Sedan 320i Bosch MEVD17.2.9 9VS9G20B#9G2LBZX8 / 9VS9G20B
An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW 3 Serie - Sedan 320i, hardware number 9VS9G20B#9G2LBZX8 and software number 9VS9G20B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3 Serie - Sedan 320ipetrol 184.0PS / 135.3kW
- Control unit
- Bosch MEVD17.2.9
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 9VS9G20B#9G2LBZX8
- Software number
- 9VS9G20B
- Bosch part / software
- 10SW001839
- Software / calibration
- 9VS9G20B / 9G2LBZX8
Technical data
| Brand | BMW |
|---|---|
| Car model | 3 Serie - Sedan 320i |
| Engine | petrol 184.0PS / 135.3kW |
| Displacement | 2.0 |
| Control unit | Bosch MEVD17.2.9 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 9VS9G20B#9G2LBZX8 |
| Software number | 9VS9G20B |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 81a123ca8cafa39d |
| ECU name | MEVD17.2.9 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW001839 | Offset in the file: 0x18001A |
| Software / calibration | 9VS9G20B / 9G2LBZX8 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.P-N20-Mo-B20-U0-F030-ULEV2-HG_AG-LL-RL-ALLRAD | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD1729_9VS9G20B//9VS9G20B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 9VS9G20B#9G2LBZX8 and software number 9VS9G20B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.9
| Hardware | Software | Vehicles |
|---|---|---|
| 9VS9G01B#9G0SQUX2 | 1037545121 | BMW 3 Serie - Sedan 328i |
| 9VS9G01B#9G0SQVX8 | 1037545121 | BMW F30 |
| 9VS9G20B#9G2LBEX2 | 10SW001839 | BMW F10/F11/F18 |
| 9VS9G20B#9G2LBXX2 | 10SW001839 | BMW F10/F11/F18 |
| 9VS9G20B#9G2LHZX2 | 10SW001839 | BMW F22 |
| 9VS9G40B#9G4LBJX2 | 1037540090 | BMW 4er 420i |
| 9VS9G40B#9G4SKFX4 | 9G4SKFX4 | BMW X3 X3-28i |
| 9VS9G40B#9G4SQTX2 | 9VS9G40B | BMW 3 Serie - Sedan 328i |