Original file
BMW 5 Serie - Sedan Bosch MEVD17.2.9 9VT9E80B#9E8LBYX1 / 1037537945
An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW 5 Serie - Sedan, hardware number 9VT9E80B#9E8LBYX1 and software number 1037537945, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5 Serie - Sedan290HP
- Control unit
- Bosch MEVD17.2.9
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 9VT9E80B#9E8LBYX1
- Software number
- 1037537945
- Software / calibration
- 9VT9E80B / 9E8LBYX1
Technical data
| Brand | BMW |
|---|---|
| Car model | 5 Serie - Sedan |
| Engine | 290HP |
| Fuel | Petrol |
| Displacement | 2.0 |
| Control unit | Bosch MEVD17.2.9 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 9VT9E80B#9E8LBYX1 |
| Software number | 1037537945 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 12c89d6785f165f1 |
| ECU name | MEVD17.2.9 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037537945 | Offset in the file: 0x18001A |
| Software / calibration | 9VT9E80B / 9E8LBYX1 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.P-N20-Mo-B20-U0-F010-EU6-HGAG_-LL-RL-JAPAN | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD1729_9VT9E80B//9VT9E80B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 9VT9E80B#9E8LBYX1 and software number 1037537945. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.9
| Hardware | Software | Vehicles |
|---|---|---|
| 9VS9G40B#9G4SQTX2 | 9VS9G40B | BMW 3 Serie - Sedan 328i |
| 9VT9D60B | 1037531104 | BMW 3er |
| 9VT9D60B#9D6LAIX1 | 1037531104 | BMW F30 |
| 9VT9E60B#9E6LDRX3 | 1037533959 | BMW 3er 320i |
| 9VT9E80B#9E8LDRX2 | 1037531104 | BMW 3er 320i |
| 9VT9E80B#9E8LELX1 | 1037537945 | BMW 1 Serie - 5drs 220i, BMW 2er 220i |
| 9VT9E80B#9E8LHQX2 | 1037537945 | BMW F30 |
| 9VT9EF0B#9EFLBIX1 | 1037540114 | BMW 4er 420i |