Original file

BMW 2er 220i Bosch MEVD17.2.9 9VT9G20B#9G2LCDX8 / 9G2LCDX8

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW 2er 220i, hardware number 9VT9G20B#9G2LCDX8 and software number 9G2LCDX8, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2er 220ipetrol 184.0PS / 135.3kW
Control unit
Bosch MEVD17.2.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9VT9G20B#9G2LCDX8
Software number
9G2LCDX8
Bosch part / software
10SW001851
Software / calibration
9VT9G20B / 9G2LCDX8

Technical data

Vehicle
BrandBMW
Car model2er 220i
Enginepetrol 184.0PS / 135.3kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number9VT9G20B#9G2LCDX8
Software number9G2LCDX8
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key86466999918ac820
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
Bosch part / software10SW001851Offset in the file: 0x18001A
Software / calibration9VT9G20B / 9G2LCDX8Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-U0-F023-EU6-HGAG_-LL-RL
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9G20B//9VT9G20B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9VT9G20B#9G2LCDX8 and software number 9G2LCDX8. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

HardwareSoftwareVehicles
9VT9G20B#9G2LBIX29VT9G20BBMW 3 Serie - Sedan 420i, BMW 4er 420i
9VT9G20B#9G2LBIX49G2LBIX4BMW 4er 420i
9VT9G20B#9G2LBUXC9G2LBUXCBMW X5 X5-28i
9VT9G20B#9G2LBUXC9VT9G20BBMW X5 SUV X5-28i
9VT9G20B#9G2LELX29VT9G20BBMW 2er 220i
9VT9G20B#9G2LNLX210SW001851BMW F30
9VT9G40B#9G4LELX21037545128BMW 2er 220i
9VT9G40B#9G4LJJX69VT9G40BBMW X3 SUV X3-20i

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page