Original file

BMW 5er 525i Bosch MEVD17.2.9 9VU9G20B#9G2DFZX6 / 9G2DFZX6

An original (stock) flash read of the Bosch MEVD17.2.9 control unit, fitted in BMW 5er 525i, hardware number 9VU9G20B#9G2DFZX6 and software number 9G2DFZX6, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er 525ipetrol 218.0PS / 160.3kW
Control unit
Bosch MEVD17.2.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9VU9G20B#9G2DFZX6
Software number
9G2DFZX6
Bosch part / software
10SW001858
Software / calibration
9VU9G20B / 9G2DFZX6

Technical data

Vehicle
BrandBMW
Car model5er 525i
Enginepetrol 218.0PS / 160.3kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.9
ECU makerBosch
Hardware number9VU9G20B#9G2DFZX6
Software number9G2DFZX6
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd89ed37d337d5256
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW001858Offset in the file: 0x18001A
Software / calibration9VU9G20B / 9G2DFZX6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-M0-F018-EU6-HGAG_-LL-RL-RWD-CHINA-400ZEL-ohne-UBK
Internal build stringMEVD17.2.9-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VU9G20B//9VU9G20B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9VU9G20B#9G2DFZX6 and software number 9G2DFZX6. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.9

HardwareSoftwareVehicles
9VU9G01B#9G0LHEX11037545209BMW 5er 525i
9VU9G01B#9G0LHYXD1037545209BMW 3er 320i
9VU9G01B#9G0LHYY81037545209BMW 3er 320i
9VU9G01B#9G0LMEX21037545209BMW F32
9VU9G20B#9G2DFZX89VU9G20BBMW 5 Serie - Long 525i
9VU9G20B#9G2LBFX29VU9G20BBMW 5 Serie - Long 528i
9VU9G20B#9G2LBWX210SW001858BMW 5 Serie - Sedan
9VU9G20B#9G2LHYX49G2LHYX4BMW 3er 320i

Bosch MEVD17.2.9 original files

The Bosch MEVD17.2.9 unit page