Original file

BMW F82 M4 3.0i biturbo Bosch MEVD17.2.G 00001A83A3B02 / 1037551770

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW F82 M4 3.0i biturbo, hardware number 00001A83A3B02 and software number 1037551770, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F82 M4 3.0i biturbo3.0 petrol 431.0PS / 317.0kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00001A83A3B02
Software number
1037551770
Bosch part / software
10SW005701
Software / calibration
6MC9ECAB / 501_S55_BG2_EU6_DKG_234

Technical data

Vehicle
BrandBMW
Car modelF82 M4 3.0i biturbo
Engine3.0 petrol 431.0PS / 317.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number00001A83A3B02
Software number1037551770
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key463f22718f84b466
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW005701Offset in the file: 0x18001A
Software / calibration6MC9ECAB / 501_S55_BG2_EU6_DKG_234Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9ECAB//6MC9ECAB///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00001A83A3B02 and software number 1037551770. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
-98GVIEX5BMW 5 Serie 35I
000019DC0145011037539900BMW 2 Serie - Coupe 335i, BMW 3er 335i
000019DC0145011037544859BMW 2 Serie - Coupe M135i, BMW 2 Serie - Coupe M235i
000019DC0145019H1JCGX2BMW 2 Serie - Coupe M235i
00001A8413C8021037544113BMW 3 Serie - M3 Sedan M3
00001ED31DB40400001ED3_029_180_004BMW 3er GT 335i
00001F1D1D69021037537579BMW 3er 335i
000020D81D64011037537588BMW 1er M135i, BMW 2er M235i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page