Original file

BMW 3er 335i Bosch MEVD17.2.G 00001F1D1D6902 / 1037537579

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er 335i, hardware number 00001F1D1D6902 and software number 1037537579, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er 335ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00001F1D1D6902
Software number
1037537579
Software / calibration
75Q9E75B / 9E7JMRZ1

Technical data

Vehicle
BrandBMW
Car model3er 335i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number00001F1D1D6902
Software number1037537579
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key59cc6fc269f92b3b
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
Bosch part / software1037537579Offset in the file: 0x18001A
Software / calibration75Q9E75B / 9E7JMRZ1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F030-ULEV2-MSA2-_HGAG-LL-RL-Allrad-CVO-BHDP-RT
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.15.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9E75B//75Q9E75B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00001F1D1D6902 and software number 1037537579. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
000019DC0145019H1JCGX2BMW 2 Serie - Coupe M235i
00001A83A3B021037551770BMW F82 M4 3.0i biturbo
00001A8413C8021037544113BMW 3 Serie - M3 Sedan M3
00001ED31DB40400001ED3_029_180_004BMW 3er GT 335i
000020D81D64011037537588BMW 1er M135i, BMW 2er M235i
000020D81D820A1037539900BMW 1er M135i
000020D81DAA03#75Q9J00B#9J0JCDX2BMW 1er M135i
000020D91D64011037537588BMW 1 Serie - 5drs 3.0i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page