Original file

BMW 2er M2 Bosch MEVD17.2.G 00005AE113502A / #6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 2er M2, hardware number 00005AE113502A and software number #6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2er M2petrol 410.0PS / 301.6kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
00005AE113502A
Software number
#6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42
Bosch part / software
10SW043388
Software / calibration
6MC9EEEB

Technical data

Vehicle
BrandBMW
Car model2er M2
Enginepetrol 410.0PS / 301.6kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number00005AE113502A
Software number#6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key300dc36e1dca0b66
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW043388Offset in the file: 0x18001A
Software / calibration6MC9EEEBOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-B30-F087-DKG-EU6c
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EEEB//6MC9EEEB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00005AE113502A and software number #6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page