Original file

BMW X5 SUV Bosch MEVD17.2.G 0170140965 / 1037539900

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW X5 SUV, hardware number 0170140965 and software number 1037539900, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUVN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170140965
Software number
1037539900
Bosch part / software
10SW005947
Software / calibration
75Q9J00B / 9J0JLWX2

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number0170140965
Software number1037539900
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8d04bdfba170d580
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW005947Offset in the file: 0x18001A
Software / calibration75Q9J00B / 9J0JLWX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F015-EU6-MSA2-AG_Allrad-CHINA-400Zeller-CVO-BHDP
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9J00B//75Q9J00B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170140965 and software number 1037539900. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
01701305771037540243BMW 3 Serie - M3 Sedan
01701355771037544113BMW 3er
01701377571037539900BMW X5 SUV
01701404651037539900BMW 2 Serie - Coupe
01701482131037539900BMW 2er
01701505431037544113BMW 4er
01701589671037539900BMW 3er
01701699701037544113BMW 3er

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page