Original file

BMW 2er Bosch MEVD17.2.G 0170834770 / 6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_OPF_63_

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 2er, hardware number 0170834770 and software number 6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_OPF_63_, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2erS55B30 · 410.0PS / 301.6kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170834770
Software number
6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_OPF_63_
Bosch part / software
10SW048983
Software / calibration
6MC2EEGB

Technical data

Vehicle
BrandBMW
Car model2er
EngineS55B30
FuelPetrol
Displacement3.0
Power410.0PS / 301.6kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number0170834770
Software number6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_OPF_63_
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya0ae2ff77055a91c
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW048983Offset in the file: 0x18001A
Software / calibration6MC2EEGBOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-B30-F087-HG-EU6c
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.25.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EEGB//6MC9EEGB///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170834770 and software number 6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_OPF_63_. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page