Original file

BMW 3er Bosch MEVD17.2.G 0261S09820 / 10SW012948

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er, hardware number 0261S09820 and software number 10SW012948, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er3.0 petrol 305PS
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
6,144.00 KB · Flash
Hardware number
0261S09820
Software number
10SW012948
Software / calibration
75Q9K00B / 9K0JMAX3

Technical data

Vehicle
BrandBMW
Car model3er
Engine3.0 petrol 305PS
Power305.9PS / 225.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number0261S09820
Software number10SW012948
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File key3746a91e78490fa0
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW012948Offset in the file: 0x18001A
Software / calibration75Q9K00B / 9K0JMAX3Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F030-EU6-MSA2-HG_AG-LL-RL-CVO-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9K00B//75Q9K00B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09820 and software number 10SW012948. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
023467810SW003187BMW 2 Serie - M2 Coupe
023467810SW012948BMW 6 Serie - Gran Coupe
023467875Q9K00B#9K0JCAX3BMW 1 Serie - 5drs
0261S098201037535516BMW F20
0261S104281037539900BMW X3 SUV, BMW 1 Serie - 5drs
0261S106141037540243BMW F82 M3 3.0 Biturbo, BMW F82 M4 3.0 Bi- Turbo, BMW F82 M4
0261S106141037551770BMW 3 Serie - M3 Sedan
0261S113621037544113BMW F82 M4

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page