Original file

BMW F82 M4 Bosch MEVD17.2.G 0261S12018 / 1037546756

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW F82 M4, hardware number 0261S12018 and software number 1037546756, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F82 M43.0 petrol 431PS
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S12018
Software number
1037546756
Software / calibration
6MC9EB3B / 500_S55_BG2_EU6_DKG_211

Technical data

Vehicle
BrandBMW
Car modelF82 M4
Engine3.0 petrol 431PS
Power431.0PS / 317.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number0261S12018
Software number1037546756
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2026efd3185fa9fc
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037546756Offset in the file: 0x18001A
Software / calibration6MC9EB3B / 500_S55_BG2_EU6_DKG_211Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.16.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EB3B//6MC9EB3B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12018 and software number 1037546756. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW F82 M4Flash4,096.00 KB€15Add to cart

All reads of 0261S12018 / 1037546756

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
0261S106141037551770BMW 3 Serie - M3 Sedan
0261S113621037544113BMW F82 M4
0261S113626MC9ECEB#490_S55_BG2_EU6_DKG_245BMW F82 M4 3.0 bi-turbo
0261S115451037544859BMW 2 Serie - Coupe 3.0i, BMW 2er, BMW F32
0261S120181037551770BMW 3 Serie - M3 Sedan
0261S1201810SW037570BMW M2
0261S1675710SW005947BMW F26, BMW X4M
0261S1675775Q9J00B#9J0JQAX1BMW 6er 640i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page