Original file

BMW M2 Bosch MEVD17.2.G 0261S12018 / 10SW037570

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW M2, hardware number 0261S12018 and software number 10SW037570, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW M23.0 petrol 410PS
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0261S12018
Software number
10SW037570
Software / calibration
6MC9EEBB / 530_S55_F87_RWD_DKG_37

Technical data

Vehicle
BrandBMW
Car modelM2
Engine3.0 petrol 410PS
Power410.0PS / 301.6kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number0261S12018
Software number10SW037570
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key18e37f7dcc3e3159
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW037570Offset in the file: 0x18001A
Software / calibration6MC9EEBB / 530_S55_F87_RWD_DKG_37Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-B30-F087-DKG-EU6
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EEBB//6MC9EEBB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12018 and software number 10SW037570. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
0261S113626MC9ECEB#490_S55_BG2_EU6_DKG_245BMW F82 M4 3.0 bi-turbo
0261S115451037544859BMW 2 Serie - Coupe 3.0i, BMW 2er, BMW F32
0261S120181037546756BMW F82 M4
0261S120181037551770BMW 3 Serie - M3 Sedan
0261S1675710SW005947BMW F26, BMW X4M
0261S1675775Q9J00B#9J0JQAX1BMW 6er 640i
0261S2181210SW037570BMW 2 Serie - M2 Coupe
0261SS1882275Z9G0EBBMW 2 Serie - M2 Coupe 3.0 bi-turbo

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page