Original file

Alpina F30 Bosch MEVD17.2.G 10SW000193

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in Alpina F30, software number 10SW000193, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alpina F303.0 petrol 410PS
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW000193
Software / calibration
75Y9G07B

Technical data

Vehicle
BrandAlpina
Car modelF30
Engine3.0 petrol 410PS
Power410PS / 301.6kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Software number10SW000193
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye0c032936380de35
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW000193Offset in the file: 0x18001A
Software / calibration75Y9G07BOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-ML-R30-ECE-EU6-MSA2-AG__AG-LL-4WD-2xHDP5-ALP-OKT15-8675135
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Y9G07B//75Y9G07B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW000193. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
1037544859BMW 2er, BMW 2 Serie - Coupe, BMW 3 Serie - Sedan
1037546756BMW 3 Serie - M3 Sedan, BMW 3er, BMW M4
1037550493Alpina
1037551770BMW 3 Serie - M3 Sedan, BMW 3er, BMW 3 Serie
10SW001961BMW X5 SUV, BMW X3 SUV, BMW 2er
10SW003187BMW 2er, BMW 2 Serie - M2 Coupe, BMW 2 Serie
10SW005701BMW 3 Serie - M3 Sedan, BMW 3er, BMW 4er
10SW005947BMW 2 Serie - Coupe, BMW 3 Serie - Sedan, BMW 4er

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page