Original file

BMW 2er M2 Competition Bosch MEVD17.2.G 10SW048983 / #6MC2EEGB#490_S55_F87_EU6c_DKG_OPF_44_

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 2er M2 Competition, hardware number 10SW048983 and software number #6MC2EEGB#490_S55_F87_EU6c_DKG_OPF_44_, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2er M2 Competitionpetrol 411.0PS / 302.3kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
10SW048983
Software number
#6MC2EEGB#490_S55_F87_EU6c_DKG_OPF_44_
Software / calibration
6MC2EEGB

Technical data

Vehicle
BrandBMW
Car model2er M2 Competition
Enginepetrol 411.0PS / 302.3kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number10SW048983
Software number#6MC2EEGB#490_S55_F87_EU6c_DKG_OPF_44_
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyfdf4af267a05d914
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW048983Offset in the file: 0x18001A
Software / calibration6MC2EEGBOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-B30-F087-DKG-EU6c
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EEGB//6MC9EEGB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW048983 and software number #6MC2EEGB#490_S55_F87_EU6c_DKG_OPF_44_. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
0261SS1882275Z9G0EBBMW 2 Serie - M2 Coupe 3.0 bi-turbo
035003187275Z9G0AB#506_N55_F087_EU6_DKG_035BMW 2er
10375441131037544113BMW 4er M4
1037551770 6MC9EC0B1037551770BMW 4er M4
6MC2EEGB#6MC9EEGB_490_S55_Comp_EU6c_KG_OPF_636MC2EEGBBMW 3 Serie - M3 Sedan M4 Competition
6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_DKG_OPF_636MC2EEGBBMW 2 Serie - M2 Coupe M2 Competition
6MC2EEGB#6MC9EEGB_500_S55_F87_EU6c_DKG_OPF_646MC2EEGBBMW 2 Serie - M2 Coupe M2 Competition
6MC9EA9B#5001037540243BMW 3 Serie - M3 Sedan, BMW F82 M4, BMW F80 M3

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page