Original file

BMW X5 SUV Bosch MEVD17.2.G 10SW050207

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW X5 SUV, software number 10SW050207, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUV3.0 petrol 305PS
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
10SW050207
Software / calibration
75Q9K10B / 9K1ZYYX0

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
Engine3.0 petrol 305PS
Power305.9PS / 225.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Software number10SW050207
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybcf2aaa115a5d923
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
Bosch part / software10SW050207Offset in the file: 0x18001A
Software / calibration75Q9K10B / 9K1ZYYX0Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F015-EU6-MSA-AG-_Allrad-RAN-CVO-BHDP
Internal build stringMEVD17.2.6-CB_L6C-D6.2.0_G.5.25.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9K10B//75Q9K10B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW050207. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW X3 SUVFlash2,048.00 KB€15Add to cart
BMW X5Flash4,096.00 KB€15Add to cart
BMW X5Flash2,048.00 KB€15Add to cart

All reads of 10SW050207

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
10SW018905BMW 3 Serie - M3 Sedan, BMW 3er, BMW 3 Serie
10SW037570BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan, BMW 2er
10SW043388BMW 2 Serie, BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan
10SW048983BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan, BMW 2er
10SW063504BMW 2 Serie - M2 Coupe
75B98G6B#98GVIAX5BMW 5 Serie - Sedan
75Q2G00BBMW 4er
75Q9H10B#9H1JCFX2BMW 2 Serie - Coupe

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page