Original file

BMW 3 Serie - M3 Sedan M3 Bosch MEVD17.2.G 6MC9EB1B#501_S55_BG2_US_199 / 1037544113

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3 Serie - M3 Sedan M3, hardware number 6MC9EB1B#501_S55_BG2_US_199 and software number 1037544113, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - M3 Sedan M3petrol 431.0PS / 317.0kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
6MC9EB1B#501_S55_BG2_US_199
Software number
1037544113
Software / calibration
6MC9EB1B / 501_S55_BG2_US_199

Technical data

Vehicle
BrandBMW
Car model3 Serie - M3 Sedan M3
Enginepetrol 431.0PS / 317.0kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number6MC9EB1B#501_S55_BG2_US_199
Software number1037544113
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8cc7cf546838724a
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037544113Offset in the file: 0x18001A
Software / calibration6MC9EB1B / 501_S55_BG2_US_199Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-HG-US
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.16.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EB1B//6MC9EB1B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6MC9EB1B#501_S55_BG2_US_199 and software number 1037544113. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
6MC9EA9B#5001037540243BMW 3 Serie - M3 Sedan, BMW F82 M4, BMW F80 M3
6MC9EA9B#500_S55_BG2_EU6_DKG_1571037540243BMW 3 Serie - M3 Sedan M3, BMW F8x M4 3.0i biturbo
6MC9EB1B#5011037544113BMW F80 M3, BMW 3er
6MC9EB1B#501_S55_BG2_EU6_DKG_1991037544113BMW 3 Serie - M3 Sedan M4
6MC9EB3B#5001037546756BMW F82 M4, BMW F80 M3
6MC9EB3B#500_S55_BG2_EU6_2071037546756BMW F80 M3
6MC9EB3B#500_S55_BG2_EU6_DKG_2071037546756BMW 3 Serie - M3 Sedan M3, BMW F8x M3 3.0i biturbo
6MC9EB3B#500_S55_BG2_US_2111037546756BMW 3 Serie - M3 Sedan M3

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page