Original file

BMW F80 M3 Bosch MEVD17.2.G 6MC9EB3B#500_S55_BG2_EU6_207 / 1037546756

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW F80 M3, hardware number 6MC9EB3B#500_S55_BG2_EU6_207 and software number 1037546756, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F80 M33.0 500HP
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6MC9EB3B#500_S55_BG2_EU6_207
Software number
1037546756
Software / calibration
6MC9EB3B / 500_S55_BG2_EU6_207

Technical data

Vehicle
BrandBMW
Car modelF80 M3
Engine3.0 500HP
FuelPetrol
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number6MC9EB3B#500_S55_BG2_EU6_207
Software number1037546756
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7485aeed877cb317
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software1037546756Offset in the file: 0x18001A
Software / calibration6MC9EB3B / 500_S55_BG2_EU6_207Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-HG-EU6
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EB3B//6MC9EB3B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6MC9EB3B#500_S55_BG2_EU6_207 and software number 1037546756. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
6MC9EB1B#5011037544113BMW F80 M3, BMW 3er
6MC9EB1B#501_S55_BG2_EU6_DKG_1991037544113BMW 3 Serie - M3 Sedan M4
6MC9EB1B#501_S55_BG2_US_1991037544113BMW 3 Serie - M3 Sedan M3
6MC9EB3B#5001037546756BMW F82 M4, BMW F80 M3
6MC9EB3B#500_S55_BG2_EU6_DKG_2071037546756BMW 3 Serie - M3 Sedan M3, BMW F8x M3 3.0i biturbo
6MC9EB3B#500_S55_BG2_US_2111037546756BMW 3 Serie - M3 Sedan M3
6MC9ECAB#501_S55_BG2_EU6_2346MC9ECABBMW 3 Serie - M3 Sedan M3
6MC9ECEB#490_S55_BG2_EU6_DKG_2456MC9ECEBBMW F8x M4 3.0 Bi-Turbo

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page