Original file
BMW 3 Serie - M3 Sedan M3 Bosch MEVD17.2.G 6MC9ECAB#501_S55_BG2_EU6_234 / 6MC9ECAB
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3 Serie - M3 Sedan M3, hardware number 6MC9ECAB#501_S55_BG2_EU6_234 and software number 6MC9ECAB, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3 Serie - M3 Sedan M3petrol 431.0PS / 317.0kW
- Control unit
- Bosch MEVD17.2.G
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 6MC9ECAB#501_S55_BG2_EU6_234
- Software number
- 6MC9ECAB
- Bosch part / software
- 10SW005701
- Software / calibration
- 6MC9ECAB / 501_S55_BG2_EU6_234
Technical data
| Brand | BMW |
|---|---|
| Car model | 3 Serie - M3 Sedan M3 |
| Engine | petrol 431.0PS / 317.0kW |
| Displacement | 3.0 |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Hardware number | 6MC9ECAB#501_S55_BG2_EU6_234 |
| Software number | 6MC9ECAB |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | b9cc4aa85a06becf |
| ECU name | MEVD17.2.G | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW005701 | Offset in the file: 0x18001A |
| Software / calibration | 6MC9ECAB / 501_S55_BG2_EU6_234 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.G-S55-BG2-B30-F080-HG-EU6 | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172G_6MC9ECAB//6MC9ECAB/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 6MC9ECAB#501_S55_BG2_EU6_234 and software number 6MC9ECAB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.G
| Hardware | Software | Vehicles |
|---|---|---|
| 6MC9EB3B#500 | 1037546756 | BMW F82 M4, BMW F80 M3 |
| 6MC9EB3B#500_S55_BG2_EU6_207 | 1037546756 | BMW F80 M3 |
| 6MC9EB3B#500_S55_BG2_EU6_DKG_207 | 1037546756 | BMW 3 Serie - M3 Sedan M3, BMW F8x M3 3.0i biturbo |
| 6MC9EB3B#500_S55_BG2_US_211 | 1037546756 | BMW 3 Serie - M3 Sedan M3 |
| 6MC9ECEB#490_S55_BG2_EU6_DKG_245 | 6MC9ECEB | BMW F8x M4 3.0 Bi-Turbo |
| 6MC9ECEB#490_S55_Comp_EU6_DKG_245 | 6MC9ECEB | BMW 3 Serie - M3 Sedan M3 |
| 6MC9ED0B#500_S55_BG2_EU6_DKG_251 | 6MC9ED0B | BMW 3 Serie - M3 Sedan M3 |
| 6MC9ED0B#500_S55_Comp_US_DKG_249 | 6MC9ED0B | BMW F8x M4 Competition 3.0 Bi-Turbo |