Original file

BMW F8x M4 Competition 3.0 Bi-Turbo Bosch MEVD17.2.G 6MC9ED0B#500_S55_Comp_US_DKG_249 / 6MC9ED0B

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW F8x M4 Competition 3.0 Bi-Turbo, hardware number 6MC9ED0B#500_S55_Comp_US_DKG_249 and software number 6MC9ED0B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F8x M4 Competition 3.0 Bi-Turbo3.0 petrol 450.0PS / 331.0kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
6MC9ED0B#500_S55_Comp_US_DKG_249
Software number
6MC9ED0B
Bosch part / software
10SW018905

Technical data

Vehicle
BrandBMW
Car modelF8x M4 Competition 3.0 Bi-Turbo
Engine3.0 petrol 450.0PS / 331.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number6MC9ED0B#500_S55_Comp_US_DKG_249
Software number6MC9ED0B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9b93369675bb1fef
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW018905Offset in the file: 0x18001A
Software / calibration6MC9ED0BOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-DKG-US
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9ED0B//6MC9ED0B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6MC9ED0B#500_S55_Comp_US_DKG_249 and software number 6MC9ED0B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
6MC9ECAB#501_S55_BG2_EU6_2346MC9ECABBMW 3 Serie - M3 Sedan M3
6MC9ECEB#490_S55_BG2_EU6_DKG_2456MC9ECEBBMW F8x M4 3.0 Bi-Turbo
6MC9ECEB#490_S55_Comp_EU6_DKG_2456MC9ECEBBMW 3 Serie - M3 Sedan M3
6MC9ED0B#500_S55_BG2_EU6_DKG_2516MC9ED0BBMW 3 Serie - M3 Sedan M3
6MC9ED0B#510_S55_BG2_US_DKG_2541037546756BMW 3 Serie - M3 Sedan M4
6MC9ED0B#510_S55_Comp_EU6_DKG_2546MC9ED0BBMW 3 Serie - M3 Sedan M3 Competition, BMW 3er M3 Competition
6MC9ED0B#510_S55_GTS_EU6_DKG_2546MC9ED0BBMW 3 Serie - M3 Sedan M4 GTS
75Q9E72B#9E7JMQY01037537588BMW 3 Serie - Sedan 435i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page