Original file

BMW 5 Serie - Sedan Bosch MEVD17.2.G 75B98G6B#98GVIAX5

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 5 Serie - Sedan, software number 75B98G6B#98GVIAX5, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - SedanN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
75B98G6B#98GVIAX5
Bosch part / software
10SW004439
Software / calibration
75B98G6B / 98GVIAX5

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Software number75B98G6B#98GVIAX5
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfa990ad533cafe5c
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
Bosch part / software10SW004439Offset in the file: 0x18001A
Software / calibration75B98G6B / 98GVIAX5Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F010-EU5-MSA2-AG-L_L-RL-PVL
Internal build stringMEVD17.2-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G6B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 75B98G6B#98GVIAX5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
10SW043388BMW 2 Serie, BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan
10SW048983BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan, BMW 2er
10SW050207BMW X5, BMW X3 SUV, BMW X5 SUV
10SW063504BMW 2 Serie - M2 Coupe
75Q2G00BBMW 4er
75Q9H10B#9H1JCFX2BMW 2 Serie - Coupe
75Q9H10B#9H1JCHX2BMW 1er
75Q9H10B#9H1JLWX2BMW X5 SUV

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page