Original file

BMW 4er Bosch MEVD17.2.G 75Q2G00B

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 4er, software number 75Q2G00B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 4erdiesel · 404.0PS / 297.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
75Q2G00B

Technical data

Vehicle
BrandBMW
Car model4er
Enginediesel
Power404.0PS / 297.1kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Software number75Q2G00B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key40bd6dadd6f4a23c
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Software / calibration75Q2G00BOffset in the file: 0x1FFE01
Data set descriptionnull
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.15.1-TESTKEYOffset in the file: 0x00FDB4
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q2G00B//75Q2G00B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 75Q2G00B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
10SW048983BMW 2 Serie - M2 Coupe, BMW 3 Serie - M3 Sedan, BMW 2er
10SW050207BMW X5, BMW X3 SUV, BMW X5 SUV
10SW063504BMW 2 Serie - M2 Coupe
75B98G6B#98GVIAX5BMW 5 Serie - Sedan
75Q9H10B#9H1JCFX2BMW 2 Serie - Coupe
75Q9H10B#9H1JCHX2BMW 1er
75Q9H10B#9H1JLWX2BMW X5 SUV
75Q9H10B#9H1JLYX2BMW X5 SUV

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page