Original file

BMW 3 Serie - Sedan 435i Bosch MEVD17.2.G 75Q9E72B#9E7JMQY0 / 1037537588

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3 Serie - Sedan 435i, hardware number 75Q9E72B#9E7JMQY0 and software number 1037537588, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 435ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
75Q9E72B#9E7JMQY0
Software number
1037537588
Software / calibration
75Q9E72B / 9E7JMQY0

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 435i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number75Q9E72B#9E7JMQY0
Software number1037537588
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyaca728b4f6a9d731
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software1037537588Offset in the file: 0x18001A
Software / calibration75Q9E72B / 9E7JMQY0Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F030-ULEV2-MSA2-_HGAG-LL-RL-CVO-BHDP-RT
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9E72B//75Q9E72B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75Q9E72B#9E7JMQY0 and software number 1037537588. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
6MC9ED0B#500_S55_Comp_US_DKG_2496MC9ED0BBMW F8x M4 Competition 3.0 Bi-Turbo
6MC9ED0B#510_S55_BG2_US_DKG_2541037546756BMW 3 Serie - M3 Sedan M4
6MC9ED0B#510_S55_Comp_EU6_DKG_2546MC9ED0BBMW 3 Serie - M3 Sedan M3 Competition, BMW 3er M3 Competition
6MC9ED0B#510_S55_GTS_EU6_DKG_2546MC9ED0BBMW 3 Serie - M3 Sedan M4 GTS
75Q9E75B#9E7JMSZ11037537579BMW 1 Serie - 5drs
75Q9EF0B#9EFJCAX91037539900BMW 1 Serie - 5drs
75Q9EF0B#9EFJCDX81037539900BMW 1 Serie - 5drs
75Q9EF0B#9EFJCFX91037539900BMW F22

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page