Original file

BMW X5 SUV Bosch MEVD17.2.G 75Q9H10B#9H1JLWX2

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW X5 SUV, software number 75Q9H10B#9H1JLWX2, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5 SUVN55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
75Q9H10B#9H1JLWX2
Bosch part / software
10SW001961
Software / calibration
75Q9H10B / 9H1JLWX2

Technical data

Vehicle
BrandBMW
Car modelX5 SUV
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Software number75Q9H10B#9H1JLWX2
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key71ac480c76bd4f8a
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
Bosch part / software10SW001961Offset in the file: 0x18001A
Software / calibration75Q9H10B / 9H1JLWX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F015-EU6-MSA2-AG_Allrad-CHINA-400Zeller-CVO-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9H10B//75Q9H10B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 75Q9H10B#9H1JLWX2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
75B98G6B#98GVIAX5BMW 5 Serie - Sedan
75Q2G00BBMW 4er
75Q9H10B#9H1JCFX2BMW 2 Serie - Coupe
75Q9H10B#9H1JCHX2BMW 1er
75Q9H10B#9H1JLYX2BMW X5 SUV
75Q9J00B#9J0JCAX1BMW 1er
75Q9J00B#9J0JCHX2BMW 2er, BMW F20
75Q9J00B#9J0JMBX1BMW 3er

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page