Original file

BMW 1 Serie - 5drs M135i Bosch MEVD17.2.G 75Q9J00B#9J0JCDX2 / 75Q9J00B

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 1 Serie - 5drs M135i, hardware number 75Q9J00B#9J0JCDX2 and software number 75Q9J00B, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie - 5drs M135ipetrol 320.0PS / 235.4kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
75Q9J00B#9J0JCDX2
Software number
75Q9J00B
Bosch part / software
10SW005947
Software / calibration
75Q9J00B / 9J0JCDX2

Technical data

Vehicle
BrandBMW
Car model1 Serie - 5drs M135i
Enginepetrol 320.0PS / 235.4kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number75Q9J00B#9J0JCDX2
Software number75Q9J00B
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8dad5dbbc513f28c
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW005947Offset in the file: 0x18001A
Software / calibration75Q9J00B / 9J0JCDX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-O0-B30-F020-EU6-MSA2-HG_AG-LL-RL-CVO-BHDP
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9J00B//75Q9J00B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75Q9J00B#9J0JCDX2 and software number 75Q9J00B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
75Q9G00B#9G0JLBX41037544859BMW F01/F02/F03
75Q9G00B#9G0JLBXF1037539900BMW X5 X5-35i
75Q9G00B#9G0JPHX41037544859BMW F22
75Q9J00B#9J0JCAX29J0JCAX2BMW 1 Serie - 5drs 135i
75Q9K00B#9K0JCHX375Q9K00BBMW 2 Serie - Coupe M135i
75Q9K00B#9K0JMQX39K0JMQX3BMW 3 Serie - Sedan 335i
75Q9K00B#9K0UMDX39K0UMDX3BMW 3 Serie - Sedan 435i
75Q9K00B#9K0ZYYX59K0ZYYX5BMW X5 X5-35i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page