Original file
BMW 3er Bosch MEVD17.2.G 75Q9J00B#9J0JNFX2
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er, software number 75Q9J00B#9J0JNFX2, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3erN55B30 · 306.0PS / 225.1kW
- Control unit
- Bosch MEVD17.2.G
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Software number
- 75Q9J00B#9J0JNFX2
- Bosch part / software
- 10SW005947
- Software / calibration
- 75Q9J00B / 9J0JNFX2
Technical data
| Brand | BMW |
|---|---|
| Car model | 3er |
| Engine | N55B30 |
| Fuel | Petrol |
| Displacement | 3.0 |
| Power | 306.0PS / 225.1kW |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Software number | 75Q9J00B#9J0JNFX2 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 2e2f076c45ce3c16 |
| ECU name | MEVD17.2.G | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW005947 | Offset in the file: 0x18001A |
| Software / calibration | 75Q9J00B / 9J0JNFX2 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.G-N55-M0-B30-F034-ULEV2-MSA2-_HGAG-LL-RL-Allrad-CVO-BHDP | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172G_75Q9J00B//75Q9J00B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 75Q9J00B#9J0JNFX2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.G
| Hardware | Software | Vehicles |
|---|---|---|
| 75Q9J00B#9J0JCAX1 | BMW 1er | |
| 75Q9J00B#9J0JCHX2 | BMW 2er, BMW F20 | |
| 75Q9J00B#9J0JMBX1 | BMW 3er | |
| 75Q9J00B#9J0JMDX2 | BMW 4er | |
| 75Q9J00B#9J0JTAX1 | BMW 4er | |
| 75Q9J00B#9J0JTSX5 | BMW X4 | |
| 75Q9J00B#9J0JUGX5 | BMW 6er | |
| 75Q9J00B#9J0ZYYX5 | BMW X5 SUV |