Original file

BMW 3 Serie - Sedan 335i Bosch MEVD17.2.G 75Q9K00B#9K0JMQX3 / 9K0JMQX3

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3 Serie - Sedan 335i, hardware number 75Q9K00B#9K0JMQX3 and software number 9K0JMQX3, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 335ipetrol 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
75Q9K00B#9K0JMQX3
Software number
9K0JMQX3
Bosch part / software
10SW012948
Software / calibration
75Q9K00B / 9K0JMQX3

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 335i
Enginepetrol 306.0PS / 225.1kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number75Q9K00B#9K0JMQX3
Software number9K0JMQX3
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key926e7c02dfff2d8b
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
Bosch part / software10SW012948Offset in the file: 0x18001A
Software / calibration75Q9K00B / 9K0JMQX3Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-M0-B30-F030-ULEV2-MSA2-_HGAG-LL-RL-CVO-BHDP-RT
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9K00B//75Q9K00B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75Q9K00B#9K0JMQX3 and software number 9K0JMQX3. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
75Q9G00B#9G0JPHX41037544859BMW F22
75Q9J00B#9J0JCAX29J0JCAX2BMW 1 Serie - 5drs 135i
75Q9J00B#9J0JCDX275Q9J00BBMW 1 Serie - 5drs M135i
75Q9K00B#9K0JCHX375Q9K00BBMW 2 Serie - Coupe M135i
75Q9K00B#9K0UMDX39K0UMDX3BMW 3 Serie - Sedan 435i
75Q9K00B#9K0ZYYX59K0ZYYX5BMW X5 X5-35i
75Y9G07B#000037AA-F30-F3175Y9G07BAlpina F30 3.0 BiTurbo
75Y9G10B#000037AA-F30-F3175Y9G10BAlpina F30 3.0T

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page