Original file
BMW 6er Bosch MEVD17.2.G 75Q9K00B#9K0JUGX3
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 6er, software number 75Q9K00B#9K0JUGX3, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 6er3.0 320PS
- Control unit
- Bosch MEVD17.2.G
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Software number
- 75Q9K00B#9K0JUGX3
- Bosch part / software
- 10SW012948
- Software / calibration
- 75Q9K00B / 9K0JUGX3
Technical data
| Brand | BMW |
|---|---|
| Car model | 6er |
| Engine | 3.0 320PS |
| Fuel | Petrol |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Software number | 75Q9K00B#9K0JUGX3 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 3d2d22cfc1298f72 |
| ECU name | MEVD17.2.G | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW012948 | Offset in the file: 0x18001A |
| Software / calibration | 75Q9K00B / 9K0JUGX3 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.G-N55-O0-B30-F012-EU6-MSA2-AG_LL-RL-RWD-CVO-BHDP-PWP-RAN | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172G_75Q9K00B//75Q9K00B/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 75Q9K00B#9K0JUGX3. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.G
| Hardware | Software | Vehicles |
|---|---|---|
| 75Q9K00B#9K0JPKX3 | BMW 4er | |
| 75Q9K00B#9K0JQAX6 | BMW 6 Serie - Gran Coupe | |
| 75Q9K00B#9K0JTEX3 | BMW 4 Serie - Gran Coupe | |
| 75Q9K00B#9K0JTSX5 | BMW X4 | |
| 75Q9K00B#9K0ZYYX5 | BMW X6 | |
| 75Q9K00B#9K0ZYZX5 | BMW X4 | |
| #C1#DST#MEVD17.2.G-N55-T0-B30-F087-DKG-US | 10SW003187 | BMW 2er |
| #C1#DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c | 10SW037570 | BMW 2er |