Original file

BMW 2er Bosch MEVD17.2.G DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c / 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 2er, hardware number DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c and software number 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2erS55B30 · 410.0PS / 301.6kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c
Software number
6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_
Bosch part / software
10SW037570
Software / calibration
6MC9EEBB

Technical data

Vehicle
BrandBMW
Car model2er
EngineS55B30
FuelPetrol
Displacement3.0
Power410.0PS / 301.6kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware numberDST#MEVD17.2.G-S55-B30-F087-DKG-EU6c
Software number6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2761b26f667a1826
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW037570Offset in the file: 0x18001A
Software / calibration6MC9EEBBOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-B30-F087-DKG-EU6c
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9EEBB//6MC9EEBB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c and software number 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 2erFlash4,096.00 KB€15Add to cart

All reads of DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c / 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_

Other pairs of Bosch MEVD17.2.G

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page