Original file
BMW 2er POWER PLUS ! Bosch MEVD17.2.G DST#MEVD17.2.G-S55-B30-F087-HG-EU6c / 6MC9EEBB#530_S55_F87_EU6c_OPF_37
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 2er POWER PLUS !, hardware number DST#MEVD17.2.G-S55-B30-F087-HG-EU6c and software number 6MC9EEBB#530_S55_F87_EU6c_OPF_37, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 2er POWER PLUS !S55B30 · 431.0PS / 317.0kW
- Control unit
- Bosch MEVD17.2.G
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- DST#MEVD17.2.G-S55-B30-F087-HG-EU6c
- Software number
- 6MC9EEBB#530_S55_F87_EU6c_OPF_37
- Bosch part / software
- 10SW037570
- Software / calibration
- 6MC9EEBB
Technical data
| Brand | BMW |
|---|---|
| Car model | 2er POWER PLUS ! |
| Engine | S55B30 |
| Fuel | Petrol |
| Displacement | 3.0 |
| Power | 431.0PS / 317.0kW |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2.G-S55-B30-F087-HG-EU6c |
| Software number | 6MC9EEBB#530_S55_F87_EU6c_OPF_37 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 4725069ecfe26b4b |
| ECU name | MEVD17.2.G | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW037570 | Offset in the file: 0x18001A |
| Software / calibration | 6MC9EEBB | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.G-S55-B30-F087-HG-EU6c | |
| Internal build string | MEVD17.2.G-CB_L6C-D6.2.0_G.5.18.1 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172G_6MC9EEBB//6MC9EEBB/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.G-S55-B30-F087-HG-EU6c and software number 6MC9EEBB#530_S55_F87_EU6c_OPF_37. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.G
| Hardware | Software | Vehicles |
|---|---|---|
| DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c | 6MC2EEGB#6MC9EEGB_490_S55_F87_EU6c_DKG_OPF_63 | BMW 2 Serie - M2 Coupe |
| DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c | 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37 | BMW 2er |
| DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c | 6MC9EEBB#530_S55_F87_EU6c_DKG_OPF_37_ | BMW 2er |
| DST#MEVD17.2.G-S55-B30-F087-DKG-EU6c | 6MC9EEEB#509_S55_F87_EU6c_DKG_OPF_42_ | BMW 2er, BMW 2 Serie - M2 Coupe |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037540243 | BMW 4er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037544113 | BMW 3er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037546756 | BMW 4er, BMW 3er, BMW 3 Serie - M3 Sedan |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037551770 | BMW 3 Serie - M3 Sedan, BMW 4er |