Original file
BMW 3er Bosch MEVD17.2.G DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 / 10SW037570
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er, hardware number DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 and software number 10SW037570, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 3er3.0 petrol 450PS
- Control unit
- Bosch MEVD17.2.G
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
- Software number
- 10SW037570
- Bosch part / software
- 10SW043388
- Software / calibration
- 6MC9EEEB
Technical data
| Brand | BMW |
|---|---|
| Car model | 3er |
| Engine | 3.0 petrol 450PS |
| Power | 450PS / 331.0kW |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 |
| Software number | 10SW037570 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | dc33ba0251e0fa55 |
| ECU name | MEVD17.2.G | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW043388 | Offset in the file: 0x18001A |
| Software / calibration | 6MC9EEEB | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | |
| Internal build string | MEVD17.2.6-CB_L6C-D6.2.0_G.5.25.0 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172G_6MC9EEEB//6MC9EEEB/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 and software number 10SW037570. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.G
| Hardware | Software | Vehicles |
|---|---|---|
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037540243 | BMW 4er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037544113 | BMW 3er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037546756 | BMW 4er, BMW 3er, BMW 3 Serie - M3 Sedan |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 1037551770 | BMW 3 Serie - M3 Sedan, BMW 4er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 6MC2EEGB#490_S55_Comp_EU6c_DKG_OPF_44_ | BMW 4er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 6MC9ECAB#501_S55_BG2_EU6_DKG_234 | BMW 3er, BMW 3 Serie - M3 Sedan, BMW 4er |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 6MC9ECAB#501_S55_Comp_EU6_DKG_234 | BMW 3er, BMW 3 Serie - M3 Sedan |
| DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 | 6MC9ECCB#500_S55_BG2_EU6_DKG_239 | BMW 4er, BMW 3er |