Original file

BMW 3er Bosch MEVD17.2.G DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 / 6MC9ECAB#501_S55_BG2_EU6_DKG_234

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er, hardware number DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 and software number 6MC9ECAB#501_S55_BG2_EU6_DKG_234, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3erS55B30 · 431.0PS / 317.0kW
Control unit
Bosch MEVD17.2.G
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Software number
6MC9ECAB#501_S55_BG2_EU6_DKG_234
Bosch part / software
10SW005701
Software / calibration
6MC9ECAB / 501_S55_BG2_EU6_DKG_234

Technical data

Vehicle
BrandBMW
Car model3er
EngineS55B30
FuelPetrol
Displacement3.0
Power431.0PS / 317.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware numberDST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Software number6MC9ECAB#501_S55_BG2_EU6_DKG_234
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd31fb3e3830826ab
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
Bosch part / software10SW005701Offset in the file: 0x18001A
Software / calibration6MC9ECAB / 501_S55_BG2_EU6_DKG_234Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9ECAB//6MC9ECAB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 and software number 6MC9ECAB#501_S55_BG2_EU6_DKG_234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 3erFlash2,048.00 KB€15Add to cart
BMW 3 Serie - M3 SedanFlash4,096.00 KB€15Add to cart
BMW 4erFlash4,096.00 KB€15Add to cart

All reads of DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 / 6MC9ECAB#501_S55_BG2_EU6_DKG_234

Other pairs of Bosch MEVD17.2.G

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page