Original file
BMW 5er Bosch MEVD17.2.G DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL / 75B98G6B#98GVIEX
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 5er, hardware number DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL and software number 75B98G6B#98GVIEX, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5erN55B30 · 306.0PS / 225.1kW
- Control unit
- Bosch MEVD17.2.G
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL
- Software number
- 75B98G6B#98GVIEX
- Bosch part / software
- 10SW004439
- Software / calibration
- 75B98G6B / 98GVIEX5
Technical data
| Brand | BMW |
|---|---|
| Car model | 5er |
| Engine | N55B30 |
| Fuel | Petrol |
| Displacement | 3.0 |
| Power | 306.0PS / 225.1kW |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL |
| Software number | 75B98G6B#98GVIEX |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 08dfecbb85205570 |
| ECU name | MEVD17.2.X | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW004439 | Offset in the file: 0x18001A |
| Software / calibration | 75B98G6B / 98GVIEX5 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL | |
| Internal build string | MEVD17.2-CB_L6C-D.6.2.0_G.5.7.0 | Offset in the file: 0x00FDBC |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//75B98G6B/Dst00// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL and software number 75B98G6B#98GVIEX. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.