Original file
BMW X3 Bosch MEVD17.2.G DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL / 75B98G6B#98GVGDX5
An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW X3, hardware number DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL and software number 75B98G6B#98GVGDX5, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW X3N55B30 · 306.0PS / 225.1kW
- Control unit
- Bosch MEVD17.2.G
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL
- Software number
- 75B98G6B#98GVGDX5
- Bosch part / software
- 10SW004439
- Software / calibration
- 75B98G6B / 98GVGDX5
Technical data
| Brand | BMW |
|---|---|
| Car model | X3 |
| Engine | N55B30 |
| Fuel | Petrol |
| Displacement | 3.0 |
| Power | 306.0PS / 225.1kW |
| Control unit | Bosch MEVD17.2.G |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL |
| Software number | 75B98G6B#98GVGDX5 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 341e4bef9ab79814 |
| ECU name | MEVD17.2.X | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW004439 | Offset in the file: 0x18001A |
| Software / calibration | 75B98G6B / 98GVGDX5 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL | |
| Bosch project identifier (EPK) | 40/1/MED17/11/MEVD172X//75B98G6B/Dst00// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL and software number 75B98G6B#98GVGDX5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| BMW X3 | 2,048.00 KB | €15 | Add to cart |
All reads of DST#MEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-M_KS-Allrad-PVL / 75B98G6B#98GVGDX5