Original file

BMW 5 Serie - Sedan Bosch MEVD17.2.G DST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO / 1037545013

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 5 Serie - Sedan, hardware number DST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO and software number 1037545013, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedan3.0 petrol 306PS
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO
Software number
1037545013
Software / calibration
75I9EH0B / 9EHZYGX9

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware numberDST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO
Software number1037545013
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8b26a997181176a4
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software1037545013Offset in the file: 0x18001A
Software / calibration75I9EH0B / 9EHZYGX9Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75I9EH0B//75I9EH0B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO and software number 1037545013. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 5erFlash4,096.00 KB€15Add to cart

All reads of DST#MEVD17.2.Z-N55-Gen2_0-M0-B30-F010-EU5-_HGAG-LL-RL_CVO / 1037545013

Other pairs of Bosch MEVD17.2.G

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page