Original file

BMW 3er 3.0 Turbo Bosch MEVD17.2.G #MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 ______________________________________#6MC9ECCB#506_S55_BG2_EU6_DKG_242 / 6MC9ECCB

An original (stock) flash read of the Bosch MEVD17.2.G control unit, fitted in BMW 3er 3.0 Turbo, hardware number #MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 ______________________________________#6MC9ECCB#506_S55_BG2_EU6_DKG_242 and software number 6MC9ECCB, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er 3.0 Turbo3.0 petrol 431.0PS / 317.0kW
Control unit
Bosch MEVD17.2.G
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 ______________________________________#6MC9ECCB#506_S55_BG2_EU6_DKG_242
Software number
6MC9ECCB
Bosch part / software
10SW009089
Software / calibration
6MC9ECCB / 506_S55_BG2_EU6_DKG_242

Technical data

Vehicle
BrandBMW
Car model3er 3.0 Turbo
Engine3.0 petrol 431.0PS / 317.0kW
Control unit
Control unitBosch MEVD17.2.G
ECU makerBosch
Hardware number#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 ______________________________________#6MC9ECCB#506_S55_BG2_EU6_DKG_242
Software number6MC9ECCB
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc376055bb8a9ae20
Identification read from the file
ECU nameMEVD17.2.G
Read typeCalibration only (data set)
Bosch part / software10SW009089Offset in the file: 0x18001A
Software / calibration6MC9ECCB / 506_S55_BG2_EU6_DKG_242Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-S55-BG2-B30-F080-DKG-EU6
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_6MC9ECCB//6MC9ECCB///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.G whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number #MEVD17.2.G-S55-BG2-B30-F080-DKG-EU6 ______________________________________#6MC9ECCB#506_S55_BG2_EU6_DKG_242 and software number 6MC9ECCB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.G

HardwareSoftwareVehicles
#C1#DST#MEVD17.2.G-S55-BG2-B30-F080-HG-EU610SW009089BMW 3er
#DST#MEVD17.2.G-S55-BG2-B30-F080-DKG-EU61037551770BMW 3 Serie - M3 Sedan
#MEVD17.2.G-N55-T0-B30-F087-DKG-EU610SW014408BMW M2 Coupe
#MEVD17.2.G-S55-B30-F087-HG-EU6c10SW037570BMW 2er
-98GVIEX5BMW 5 Serie 35I
000019DC0145011037539900BMW 2 Serie - Coupe 335i, BMW 3er 335i
000019DC0145011037544859BMW 2 Serie - Coupe M135i, BMW 2 Serie - Coupe M235i
000019DC0145019H1JCGX2BMW 2 Serie - Coupe M235i

Bosch MEVD17.2.G original files

The Bosch MEVD17.2.G unit page