Original file

BMW 5 Serie - Sedan Bosch MEVD17.2.H 0000124203 / 1037545823

An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW 5 Serie - Sedan, hardware number 0000124203 and software number 1037545823, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedanpetrol · 575.1PS / 423.0kW
Control unit
Bosch MEVD17.2.H
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0000124203
Software number
1037545823
Software / calibration
8BC98BBB

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan
Enginepetrol
Displacement4.4
Power575.1PS / 423.0kW
Control unit
Control unitBosch MEVD17.2.H
ECU makerBosch
Hardware number0000124203
Software number1037545823
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9a7d71e810bf9562
Identification read from the file
ECU nameMEVD17.2.H
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037545823Offset in the file: 0x18001A
Software / calibration8BC98BBBOffset in the file: 0x1FFE01
Data set descriptionMEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG
Internal build stringMEVD17.2.H-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDCC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8BC98BBB//8BC98BBB///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000124203 and software number 1037545823. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW X5 M SUVFlash4,096.00 KB€15Add to cart
BMW X5 M SUVFlash4,096.00 KB€15Add to cart

All reads of 0000124203 / 1037545823

Other pairs of Bosch MEVD17.2.H

HardwareSoftwareVehicles
000010CA598C018BC98BGBBMW X5 X5M
00001242001037542871BMW 5er
00001242031037539310BMW X5
00001242031037540064BMW 5er
000012420310SW003192BMW 6 Serie - Gran Coupe
000012420310SW005946BMW X6 M SUV, BMW X5, BMW X6
000012420310SW012214BMW 5 Serie - Sedan, BMW X5 SUV
00001242035902000010C86DAA01 - 000020F26DAA02BMW 6er 650i

Bosch MEVD17.2.H original files

The Bosch MEVD17.2.H unit page