Original file
BMW X5 X5M Bosch MEVD17.2.H 00002495598C9F / #8BC98BGB#506_S63T2_F085_BG11_USA_8HP159
An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW X5 X5M, hardware number 00002495598C9F and software number #8BC98BGB#506_S63T2_F085_BG11_USA_8HP159, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW X5 X5Mpetrol 575.0PS / 422.9kW
- Control unit
- Bosch MEVD17.2.H
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- 00002495598C9F
- Software number
- #8BC98BGB#506_S63T2_F085_BG11_USA_8HP159
- Bosch part / software
- 10SW005946
- Software / calibration
- 8BC98BGB / 506_S63T2_F085_BG11_USA_8HP159
Technical data
| Brand | BMW |
|---|---|
| Car model | X5 X5M |
| Engine | petrol 575.0PS / 422.9kW |
| Displacement | 4.4 |
| Control unit | Bosch MEVD17.2.H |
|---|---|
| ECU maker | Bosch |
| Hardware number | 00002495598C9F |
| Software number | #8BC98BGB#506_S63T2_F085_BG11_USA_8HP159 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 2026e6269e3a0199 |
| ECU name | MEVD17.2.H | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW005946 | Offset in the file: 0x18001A |
| Software / calibration | 8BC98BGB / 506_S63T2_F085_BG11_USA_8HP159 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.H-S63Tue-B44-T2-F085-ULEV2---_8HP-BG1.1 | |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172H_8BC98BGB//8BC98BGB/// | Offset in the file: 0x1FFB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 00002495598C9F and software number #8BC98BGB#506_S63T2_F085_BG11_USA_8HP159. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.H
| Hardware | Software | Vehicles |
|---|---|---|
| 00001242035902 | 000010C86DAA01 - 000020F36DAA02 | BMW 6er 650i |
| 00001242036301 | 1037545823 | BMW X5 M SUV X6-M 4.4 BI Turbo, BMW X6 X6-M 4.4 BI Turbo |
| 00001242036301 | 898BGB | BMW X6 M SUV X6-M 4.4 BI Turbo |
| 0000184F 3_19_5 | 8AC9F80B | BMW 6er 650i |
| 0030025879 | 1037533755 | BMW 6er |
| 0030109275 | 1037542793 | BMW 7 Serie - Sedan |
| 0170004195 | 1037542793 | BMW 5 Serie - Sedan |
| 0170009245 | 1037545823 | BMW 5er |