Original file

BMW 5 Serie - Sedan 4.4i Bosch MEVD17.2.H 8AC9F65B#9F6WC8X2 / 1037539310

An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW 5 Serie - Sedan 4.4i, hardware number 8AC9F65B#9F6WC8X2 and software number 1037539310, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedan 4.4i4.4 petrol 450.0PS / 331.0kW
Control unit
Bosch MEVD17.2.H
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
8AC9F65B#9F6WC8X2
Software number
1037539310
Bosch part / software
10SW003192
Software / calibration
8AC9F65B / 9F6WC8X2

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan 4.4i
Engine4.4 petrol 450.0PS / 331.0kW
Control unit
Control unitBosch MEVD17.2.H
ECU makerBosch
Hardware number8AC9F65B#9F6WC8X2
Software number1037539310
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyaebba37b93a0a9f0
Identification read from the file
ECU nameMEVD17.2.H
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW003192Offset in the file: 0x16001A
Software / calibration8AC9F65B / 9F6WC8X2Offset in the file: 0x1DFE01
Data set descriptionMEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD
Internal build stringMEVD17.2.H-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x3FFDCC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8AC9F65B//8AC9F65B///Offset in the file: 0x15FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8AC9F65B#9F6WC8X2 and software number 1037539310. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.H

Bosch MEVD17.2.H original files

The Bosch MEVD17.2.H unit page