Original file

BMW F10/F11/F18 M Bosch MEVD17.2.H 8BC2600B

An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW F10/F11/F18 M, software number 8BC2600B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F18 M4.4 petrol 560PS
Control unit
Bosch MEVD17.2.H
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Software number
8BC2600B
Software / calibration
08000010C9_064_021_001

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18 M
Engine4.4 petrol 560PS
Power560.0PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.H
ECU makerBosch
Software number8BC2600B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8e3d1d05f327f88d
Identification read from the file
ECU nameMEVD17.2.H
Read typeFull read (boot area included)
ProcessorTC1797
Software / calibration08000010C9_064_021_001Offset in the file: 0x05B988
Internal build stringMEVD17.2.8-CB_L6C-D6.2.0_G.5.11.0-TESTKEYOffset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8BC2600B//8BC2600B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 8BC2600B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.H

Bosch MEVD17.2.H original files

The Bosch MEVD17.2.H unit page