Original file
BMW X5 M SUV X5-M Bosch MEVD17.2.H 8BC98BGB#490_S63T2_F085_BG11_EUR_8HP163 / 1037545823
An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW X5 M SUV X5-M, hardware number 8BC98BGB#490_S63T2_F085_BG11_EUR_8HP163 and software number 1037545823, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW X5 M SUV X5-Mpetrol 575.0PS / 422.9kW
- Control unit
- Bosch MEVD17.2.H
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 8BC98BGB#490_S63T2_F085_BG11_EUR_8HP163
- Software number
- 1037545823
- Bosch part / software
- 10SW005946
- Software / calibration
- 8BC98BGB / 490_S63T2_F085_BG11_EUR_8HP163
Technical data
| Brand | BMW |
|---|---|
| Car model | X5 M SUV X5-M |
| Engine | petrol 575.0PS / 422.9kW |
| Displacement | 4.4 |
| Control unit | Bosch MEVD17.2.H |
|---|---|
| ECU maker | Bosch |
| Hardware number | 8BC98BGB#490_S63T2_F085_BG11_EUR_8HP163 |
| Software number | 1037545823 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 3875c6c022932506 |
| ECU name | MEVD17.2.H | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW005946 | Offset in the file: 0x18001A |
| Software / calibration | 8BC98BGB / 490_S63T2_F085_BG11_EUR_8HP163 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.H-S63Tue-B44-T2-F085-EU6-8HP__BG1.1 | |
| Internal build string | MEVD17.2.H-CB_L6C-D6.2.0_G.5.18.1 | Offset in the file: 0x00FDCC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172H_8BC98BGB//8BC98BGB/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 8BC98BGB#490_S63T2_F085_BG11_EUR_8HP163 and software number 1037545823. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.H
| Hardware | Software | Vehicles |
|---|---|---|
| 8BC98BEB#420_S63T1_F010_BG20_SWT_USA_DKG141 | 1037554814 | BMW 5er M5 4.4 Biturbo |
| 8BC98BEB#420_S63T2_F085_BG11_EUR_8HP144 | 1037554814 | BMW X5 M SUV X6-M |
| 8BC98BGB | 10SW005946 | BMW X5 |
| 8BC98BGB#490_S63T1_F010_BG20_SWT3_EUR_Fzg163 | 8BC98BGB | BMW 6er M6 |
| 8U0907404C | 10SW003192 | BMW 6er |
| DST#MEVD17.2-N55-M0-B30-F010-EU5-MSA2-AG-L_L-RL-PVL | 1037515925 | BMW 5er |
| DST#MEVD17.2.H-N63TUE-B44-O1-F01-EU6-AG-LL_-RL-AWD | 8AC9F80B#9F8WG8X1 | BMW 7er |
| DST#MEVD17.2.H-N63TUE-B44-O1-F06-F12-F13--_EU6-AG-LL-RL-AWD | 1037539310 | BMW 6er |